3

I N T E R N A T I O N A L

Micro Systems Lab. in AJOU UNIVERSITY

-={Quick move !!}=-
[International Journal (SCI)]|[International Conference]|[Domestic Journal]|[Domestic Conference]

1. S. S. Yang, E. H. Yang, S. Y. Kim and J. D. Seo, "Fabrication of Electrostatic Actuators and Passive Valves with p+ Diaphragms for Micropumps," ASME Winter Annual Meeting, DSC-vol. 55-2, Chcago, U.S.A., Nov. 1994, pp. 733-740.

2. E. H. Yang and S. S. Yang, "A New Technique for Quantitative Determination of the Stress Prifile along the Depth of p+ Silicon Films," IEEE Int. Conf. Solid-State Sensors and Actuators (Transducers '95 / Eurosensors IX), vol. 2, Stockholm, Sweden, June 1995, pp. 68-71.

3. E. H. Yang and S. S. Yang, "Fabrication of an Electrostatic Micropump with p+ Diaphragms," Int. Symp. Microsystems, Intelligent Materials and Robots, Sendai, Japan, Sept. 1995, pp. 106-109.

4. E. H. Yang, S. S. Yang, S. W. Han and S. Y. Kim, "Fabrication and Dynamic Testing of Electrostatic Microactuators with p+ Diaphragms," IEEE Region 10 Conference on Microelectronics and VLSI, Hong Kong, Nov. 1995, pp. 28-31.

5. E. H. Yang, S. S. Yang and S. H. Yoo, "Design and Fabrication of Electrostatic Microactuators with p+ Diaphragms," Int. Workshop on Advanced Mechatronics, Cheju, Korea, Dec. 1995, pp. 28-31.

6. E. H. Yang, S. S. Yang, E. J. Park and S. H. Yoo, "Dynamic Characteristics of the Corrugated and the Flat p+ Diaphragms," ASME International Mechanical Engineering Congress and Exposition(ASME WAM., Atlanta, U.S.A., DSC-Vol. 59, Nov. 1996, pp. 441-444.

7. S. W. Lee, O. C. Jeong, S. S. Yang, "The Fabrication of a Micro Injector Actuated by Boiling and/or Electrolysis," IEEE Microelectromechanical Systems Workshop (MEMS '98), pp. 51~56, Heidelberg, Germany, Jan. 1998.

8. O. C. Jeong, S. S. Yang, "Fabrication and Drive Test of a Thermopneumatic Micropump with the Corrugated Diaphragm," ICEE The International Conference on Electrical Engineering, pp. 902~905, Kyongju, Korea, July. 1998.

9. S.W. Lee, W.Y. Sim and S. S. Yang, "Fabrication of Micro Syringe," The 10th International Conference on Solid-State Sensors and Actuators (TRANSDUCERS '99), pp. 1368~1371, Sendai, Japan, June. 1999.

10. O. C. Jeong and S. S. Yang, "Fabrication of a Thermopneumatic Micropump with a Corrugated p+ Diaphragm," The 10th International Conference on Solid-State Sensors and Actuators (TRANSDUCERS '99), pp. 1780~1783, Sendai, Japan, June. 1999.

11. H. J. Yoon, S. Y. Kim, S. W. Lee and S. S. Yang, "Fabrication of a Micro Electromagnetic Flow Sensor for Micro Flow Rate Measurement" SPIE 7th International Symposium on Smart Structures and Materials, california, USA March. 2000.

12. H. G. Jeong, O. C. Jeong, S. S. Yang, "Fabrication of electromagnetic actuator with the planar coil," SPIE 7th International Symposium on Smart Structures and Materials, california , USA March. 2000.

13. S. K. Lee, Y. Choi, W. Y. Sim, S. S. Yang, J. J. Park, "Fabrication of electroactive polymer actuator composed of polypyrrole and solid-polymer electrolyte and its application to micropump," SPIE 7th International Symposium on Smart Structures and Materials, california , USA March. 2000.

14. K. H. Kim, S. S. Yang, "Fabrication and test of an electromagnetic micro actuator with a planar coil on a parylene diaphragm," Proc. MEMS, ASME Int. Mechanical Engineering Congress and Exposition, Orlando, U. S. A, Nov. 2000.

15. W. Y. Sim, G. Y. Kim and S. S. Yang, "Fabrication of Micro Power Source (MPS) using Micro Direct Methanol Fuel Cell (uDMFC) for the Medical Application," IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2001), Interlaken, Switzerland, Jan. 2001.

16. Tae Gyu Park, Sang Sik Yang, "Fabrication of an Electrostatic Micro Actuator with Curled p+ silicon cantilevers," Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS 2001, Cote d'Azur, France, 2001. 4.

17. H. J. Yoon, J. H. Kim, T. G. Park, S. S. Yang, and K. W. Jung, "The test of hot electron emission for the micro mass spectrometer," Design, Test, Integration and Packaging of MEMS/MOEMS 2001,Cote d'Azur, France, 2001. 4.

18. J. S. Park, J. H. Choi, H. C. Cho, S. S. Yang, J. S. Yoo, "Flat Micro Heat Pipe Arrays for Cooling and Thermal Management at the Package Level," Design, Test, Integration and Packaging of MEMS/MOEMS 2001, Cote d'Azur, France, 2001. 4.

19. Soon Young Kim, Hak Jin Kim, Jin Sung Park, Sang Sik Yang, "A Telemetry Silicon Pressure Sensor of LC Resonance Type," Design, Test, Integration and Packaging of MEMS/MOEMS 2001,Cote d'Azur, France, 2001. 4.

20. H. J. Yoon, J. H. Kim, T. G. Park, S. S. Yang and K. W. Jung, " The Fabrication of the Novel Micro Time-of-Flight (TOF) Mass Spectrometer with a Micro Ion Source," The 11th International Conference on Solid-State Sensors and Actuators, Transducers '01 and Eurosensors XV Munich, Germany, June 10-14, 2001.

21. Wonchul Sim, Daeho Kim, Kihoon Kim, Keeyoung Kwon, Byungkyu Kim, Bumkyoo Choi, Sang Sik Yang and Jongoh Park, "Fabrication, Test and Simulation of a Parylene Diaphragm,"Transducers '01 and Eurosensors XV Munich, Germany, June 10-14, 2001.

22. M. S. Kim, K. Y. Kwon, S. S. Yang, “Fabrication and Test of an Electromagnetic Micropump for Cerebrospinal Fluid Shunt,” 2001 ASME International Mechanical Engineering Congress & Exposition (IMECE 2001), New York, U.S.A., 2001.11.

23. H. J. Yoon, W. Y. Sim, S. S. Yang, “The Fabrication and Test of a Phase-change Micropump,” 2001 ASME International Mechanical Engineering Congress & Exposition (IMECE 2001), New York, U.S.A., 2001.11.

24. H. J. Yoon, S. W. Lee, H. J. Kim, S. S. Yang, "Development of a Novel Cerebrospinal Fluid (CSF) Shunt System," The 16th European Conference on Solid-State Transducers (EUROSENSORS XVI), Prague, Czech Republic, September 15-18, 2002.

25. S. W. Lee, H. J. Yoon, and S. S. Yang, "Fabrication of a Two-way Pressure Regulation Micro Valve with the Anti-siphon Effect," 2002 ASME International Mechanical Engineering Congress and Exposition (IMECE 2002), New Orleans, U.S.A., Nov. 17-22, 2002.

26. O. C. Jeong, S. S. Yang, "The Effects of Drive-in Process Parameters on the Residual Stress Profile of the Boron-doped Silicon Layer," 2002 ASME International Mechanical Engineering Congress & Exposition (IMECE 2002), New Orleans, U.S.A., 2002.11.

27. E. S. Choi, S. S. Yang, "Surface Modification of the Poly(dimethylsiloxane) for Electroosmotic Flow Using 2-Hydroxyethyle Methacrylate," The 14th Molecular Electronics & Devices (ME&D) Symposium, P-79, Seoul, Korea, 2003. 3.

28.J. S. Joeng, H. J. Yoon, S. S. Yang, "A Novel Pressure Telemetry via RF Power Transmission," The 17th European Conference on Solid-State Transducers (EUROSENSORS XVII), Guimarães, Portugal, September, 2003.

29. H. J. Kim, O. C. Jeong, S. D. Hong, K. Okamoto, and S. S. Yang, "Investigation of flow characteristics using u-PIV technique in a thermo-pneumatic micropump with PDMS films," 5th International Symposium on Particle Image Velocimetry, Busan, Korea, 2003. 09.

30. E. S. Choi, S. S. Yang, "Improvement of Electroosmotic Flow Characteristic in Poly(dimethylsiloxane) channels via a Long Life Chemical Surface Modification," The 7th International Conference on Miniaturized Chemical and BioChemical analysis Systems (uTAS 2003), California, USA, 2003. 10.

31. O. C. Jeong and S. S. Yang, "An empirical formula for the estimation of the residual stress in born-doped silicon films," 2003 ASME International Mechanical Engineering Congress & Exposition (IMECE 2003), Washington, U.S.A., IMECE2003-42998, 2003. 11.

32. Sin Wook Park, Woo Young Sim, Sang Hyug Park, Byoung Hyun Min, and Sang Sik Yang, "Fabrication and test of a micro cell exciter for the differentiation of mesenchymal stem cells (MSCs)," Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT MNT 2004), Sapporo, Japan, pp. 272-275, 2004. 07.

33. O. C. Jeong, S. W. Park, S. S. Yang, and J. H. (James) Pak, "Fabrication of a peristaltic PDMS micropump," The 18th European Conference on Solid-State Transducers (EUROSENSORS XVIII), Rome, Italy, pp. 122-123, 2004. 09.

34.Sang Hyug Park, Woo Young Sim, Sin Wook Park, Sang Sik Yang, So Ra Park and Byung Hyun Min, "Chondrogenic differentiation of rabbit mesenchymal stem cells (rMSCs) by an electromagnetic force cell exciter," Joint Meeting of the Tissue Engineering Society International and the European Tissue Engineering Society, Lausanne, Switzerland, pp. 236, 2004. 10.

35. Geun Young Kim and Sang Sik Yang, "A direct methanol fuel cell of a flexible structure," 2004 International Sensors Conference, Jeju, Korea, pp. 283-284, 2004. 11.

36. Sung Rae Hwang, Woo Young Sim, Do Han Jeon, Geun Young Kim, Sang Sik Yang, James Jungho Pak, "Fabrication and test of a submicroliter-level thermopneumatic micropump," 3rd Annual International IEEE EMBS Special Topic Conference on Microtechnologies in Medicine and Biology (MMB2005), Kahuku, Hawaii, pp.143-145, 2005. 05.

37. J. S. Hwang, G. Y. Kim, S. S. Yang, S. Oh, “A micromachined hollow cathode discharge device for the flexible display,” SPIE International symposium Microelectronics, MEMS, and Nanotechnology 2005, 6037-85, Brisbane, Australia, 2005. 12.

38. W. Wang, K. K. Lee, J. S. Hwang, and S. S. Yang, "Optimized Surface Acoustic Wave-Based Pressure Sensor Using Equivalent Circuit Model," 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), Zhuhai, China, pp. 141, 2006. 01.

39. S. H. Lim, S. W. Park, J. H. Lee, H. K. Choi, S. S. Yang, and H. C. Yoon, "Disposable Smart Immunosensing Biochip Using a Novel Electrochemical Signaling Method," 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), Zhuhai, China, pp. 148, 2006. 01.

40. J. S. Hwang, J. B. Cho, K. S. Oh, S. S. Yang, S. I. Lee, K. H. Koh, and K. W. Jung, "The Micro Mass Spectrometer with a Carbon Nano Structure Ion Source," 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), Zhuhai, China, pp. 152, 2006. 01.

41. W. Y. Sim, S. W. Park, S. S. Yang, S. H. Park, and B. H. Min, "Fabrication and Preliminary Test Results of a MEMS Cell Stimulator for Stem Cell Research," 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS 2006), Zhuhai, China, pp. 154,2006. 01.

42. Sin Wook Park, Seok Hui Im, Sang Sik Yang, Jun Hwang Lee and Hyun C. Yoon, "A Smart Immunoassay for Portable Clinical Diagnostic System," Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2006), Marina Mandarin Hotel, Singapore, pp. 127,2006. 06.

43. Do Hand Jun, Woo Young Sim, Sang Sik Yang and James Jungho Pak, "Constant Delivery Thermopneumatic Valveless Micropump Using Surface Tensions," Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2006), Marina Mandarin Hotel, Singapore, pp. 174,2006. 06.

44. Wen Wang, Keekeun Lee, Insang Woo, Ikmo Park and Sangsik Yang, "Novel Saw-Based Sensor on 41° YX-LiNbO3 for Wireless Pressure Measurement," Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2006), Marina Mandarin Hotel, Singapore, pp. 247,2006. 06.

45. SangWang,-Hyug Park, Woo Young Sim, Sin Wook Park, Sang Sik Yang, So Ra Park and Byoung-Hyun Min, “An electromagnetic compressive force by cell exciter stimulates chondrogenic differentiation of bone marrow-derived mesenchymal stem cell", 8th Annual Meeting of Korean tissue engineering and regenerative medicine society, PO-24, pp. 234, June 2, 2006. : Excellent presentation Award.

46. Keekeun Lee, Wen Wang, Taehyun Kim, Insang Woo, Ikmo Park, and Sangsik Yang, "Modleling and performance evaluation of 2.4GHz SAW-based pressure", IEEE SENSOR 2006, EXCO, Daegu, Korea, pp. 283, 2006. 10.

47. W. Y. Sim, S. W. Park, S. S. Yang, S. H. Park and B. H. Min, "A Pneumatic Micro Cell Stimulator for the Differentiation of Human Mesenchymal Stem Cells (hMSCs)", The 10th International Conference on Miniaturized Chemical and BioChemical Analysis Systems (uTAS 2006), Tokyo, Japan, pp. 1543-1545, 2006. 11.

48. Do Han Jun, Woo Young Sim, Sang Sik Yang and James Jungho Pak, "A Constant Delivery Micropump Using Surface Tension and Thermopneumatic Pressure", 2006 ASME International Mechanical Engineering Congress & Exposition, Chicago, USA, 2006. 11.

49. J. B. Cho, H. J. Yoon, K. W. Jung, S. S. Yang, K. H. Koh and S. Lee, “Micro mass spectrometer using triode electron emitters with a planar carbon-nanoparticle cathode as ion source”, 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Bangkok, Thailand, January 16-19, 2007.

50. W. Wang, K. Lee, T. Kim, and S. Yang, “Development of wireless MEMS sensor for RFID tag and temperature/pressure monitoring,” SPIE Photonics West, California, USA, 6463Q1∼ 6463Q8, January 20-25, 2007

51. H. J. Yoon, S. H. Song, J. B. Cho, K. W. Jung, S. Lee, K. H. Koh and S. S. Yang, "Fabrication of an ion source using carbon nanoparticle field emitters for a micro time-of-flight mass spectrometer", The 14th International Conference of Solid-State Sensors, Transducers'07, Lyon, France, June 10-14, 2007.

52. Wang Wen, Keekeun Lee Taehyun Kim, Sangsik Yang, and Ikmo Park, "Pressure sensitivity evaluation of passive SAW microsensor integrated with pressure-tenperature and ID tag on 41°-YX LiNbO3", pp.1935-1938 The 14th International Conference of Solid-State Sensors, Transducers'07, Lyon, France, June 10-14, 2007.

53. Sang Woo Lee, Jae Wook Rhim, Sin Wook Park, and Sang Sik Yang, "A Novel Micro Rate Sensor using a Surface-Acoustic-Wave(SAW) Delay-line Oscillator", pp.1156-1159 IEEE SENSORS 2007, Atlanta, USA, October 28-31, 2007.

54. Wen Wang, Taehyun Kim, Keekeun Lee,Haekwan Oh, and Sang Sik Yang, "Development of a New Wireless Chemical Sensor for CO2 detection", pp.193-196 IEEE SENSORS 2007, Atlanta, USA, October 28-31, 2007.

55. Tae Ho Kang, Sin Wook Park, Jun Hwang Lee, Hyun C. Yoon, and Sang Sik Yang , "Portable multi-immunosensing lab-on-a- chip (LOC) triggered by air bladder", Proceedings of SPIE -- Volume 6799 BioMEMS and Nanotechnology III, SPIE Micronics, MEMS, and nanotechnology, Canberra, Austrailia, December 4-7, 2007.

56.Geunyoung Kim, Kang-il Kim, Inho Lim, Sang Sik Yang, and Soo-ghee Oh, "Development of a flexible luminous device using hollow cathode discharge", Proceedings of SPIE -- Volume 6800 Device and Process Technologies for Microelectronics, MEMS, Photonics, and Nanotechnology IV, SPIE Micronics, MEMS, and nanotechnology, Canberra, Austrailia, December 4-7, 2007.

57. Wen Wang, Taehyun Kim, Keekeun Lee,Haekwan Oh, and Sang Sik Yang, "Development of a New Wireless Chemical Sensor for CO2 detection", pp.193-196 IEEE SENSORS 2007, Atlanta, USA, October 28-31, 2007.

58. W. Wang, K. Lee, H. Oh, S. Yun and S. Yang, "IMPROVED SENSITIVITY OF NOVEL SURFACE ACOUSTIC WAVE MEMS-IDT GYROSCOPE", Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, pp. 37-39, 2008. 06.

59. In Ho Lim, Ki Jung Lee, Woo Young Sim, Kangil Kim and Sang Sik Yang, "FABRICATION AND TEST OF AN ELECTRO MAGNETIC FLAP VALVE FOR DRUG DELIVERY SYSTEMS", Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, pp. 93-96, 2008. 06.

60. Sin Wook Park, Jun Hwang Lee, Hyun C. Yoon and Sang Sik Yang, "A RELIABLE HAND-OPERATED LOC FOR THE PORTABLE IMMUNOASSAY", Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, pp. 178-181, 2008. 06.

61. H. K. Oh, W. Wang, K. K. Lee, C. K. Min, and S. S. Yang, "WIRELESS LOVE WAVE BIOSENSOR USING PROTEIN A IMMOBILIZATION", Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, pp. 218-221, 2008. 06.

62. C.Lim, W.Wang, K.Lee, H. Oh, and S.Yang, "A WIRELESS SAW CHEMICAL SENSOR FOR CO2 DETECTION WITH HUMIDITY AND TEMPERATURE COMPENSATION", Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2008), Tainan, Taiwan, pp. 265-268, 2008. 06.

63. Geunyoung Kim, Kang-il Kim, Tae-Gyu Park, Sang Sik Yang, "A novel fabrication method of a micro round tip for a probe card based on aluminum spike phenomenon", 34th Internation Conference on Micro and Nano Engineering 2008(MNE 2008), Athens, Greece, September 15-18. 2008

64. Sin Wook Park, Kang-il Kim, Sang Sik Yang, "Bonding Optimization of PDMS and PMMA by surface modification with Silane Primer", 34th Internation Conference on Micro and Nano Engineering 2008(MNE 2008), Athens, Greece, September 15-18. 2008

65. Sin wook Park, Kang-il Kim, Jun Hwang Lee, Hyun C. Yoon, and Sang Sik Yang, "A ONE-TOUCH TYPE HAND-OPERATED LOC FOR THE BIOELECTROCATALYTIC IMMUNOASSAY USING BACKFILLING METHOD", The 12th Internation Conference on Miniaturized Systems for Chemistry and Life Sciences(Micro-TAS 2008), San Diego, USA, October 12-16, 2008

66. W.-Y. Sim, S.-W. Lee, S.-W. Park, S.-S. Yang, S.-H. Park, and B.-H. Min, "A MICRO CELL CHIP INTEGRATED WITH A CAPACITIVE PRESSURE SENSOR ARRAY FOR THE STUDY OF STIMULATION EFFECT ON THE STEM CELL DIFFERENTIATION", The 12th Internation Conference on Miniaturized Systems for Chemistry and Life Sciences(Micro-TAS 2008), San Diego, USA, October 12-16, 2008

67. Tae Gyu Park, Hyejung Song, Wonjin Seo, Seung Hwan Jung, Junggi Min, Hoyoung Yun, Changgi Suk, Sang Sik Yang, Dong-Chul Han, "Novel spray coating method by the solid content control in photoresist for 3D micro devices", 2008 International Microprocesses and Nanotechnology Conference, Fukuoka, Japan, pp.122-123, 2008. 10. 29.

68. Haekwan Oh, Wen Wang, Jun-Hwang Lee, Keekeun Lee, Sangsik Yang and Hyun C. Yoon, "A wireless immune-sensor using Love wave mode", 2008 International Microprocesses and Nanotechnology Conference, Fukuoka, Japan, pp.456-457, 2008. 10. 29.

69. Geunyoung Kim, Kang-il Kim, Sang Sik Yang, and Soo-ghee Oh, "A micromachined flexible hollow cathode discharge device", 2008 International Microprocesses and Nanotechnology Conference, Fukuoka, Japan, pp.480-481, 2008. 10. 29.

70. Wen Wang, Kee-Keun Lee, Hae-Kwan Oh, and Sang Sik Yang, "Improving the sensitivity of SAW gyroscope using the interference effect", 2008 International Microprocesses and Nanotechnology Conference, Fukuoka, Japan, pp.488-489, 2008. 10. 29.

71. Hyeun Joong Yoon, Jin Ho Yang, Sang Sik Yang, and Eui-Hyeok Yang, "Microfabricated Nanowire Diluter for Controlled Assembly of Nanowires", 2008 ASME International Mechanical engineering congress and Exposition, 67865, pp.1~4, Boston, USA, 2008. 11. 4.

72. Ki Jung Lee, In Ho Lim and Sang Sik Yang, "Passive Propellant Using Gaseout Pressure for Drug Delivery System", 3rd APEC e-Health Technical Forum, pp.504, 2008. 12. 2.

73. In Ho Lim, Ki Jung Lee and Sang Sik Yang, "Fabrication of a Leakage-free Flap valve for Drug Delivery Systems", 3rd APEC e-Health Technical Forum, pp.505, 2008. 12. 2.-Best Paper Award

74. Haekwan Oh, Kee-Keun Lee, Wen Wang, Sungjin Yun, Sang Sik Yang, "Development of a novel surface acoustic wave MEMS-IDT", SPIE Photonics West, San Jose, USA, 7206-22, 2009. 01. 24.

75. Haekwan Oh, Wen Wang, Kee-Keun Lee, Sang Sik Yang, "Sensitivity evaluation of a love sensor with multilayer structure for biochemical application", SPIE Photonics West, San Jose, USA, 7207-27, 2009. 01. 24.

76. Chunbae Lim, Wen Wang, Kee-Keun Lee, Haekwan Oh, Sang Sik Yang, "Simultaneous and wireless measurement of CO2 and humidity using a SAW reflective delay line", SPIE Photonics West, San Jose, USA, 7207-32, 2009. 01. 24.

77. Chunbae Lim, Sang Sik Yang, and Keekeun Lee, "Simultaneous and Wireless Measurement of CO2 and NO2 using a SAW Reflective Delay Line", The 15th International Conference on Solid State Sensors, Actuators, and Microsystems, Denver, USA, pp 995~998, 2009. 06. 21.

78. Haekwan Oh, Keekeun Lee, and Sang Sik Yang, "The development of novel surface acoustic wave MEMS-IDT gyroscope based on standing wave mode", The 15th International Conference on Solid State Sensors, Actuators, and Microsystems, Denver, USA, pp 1162~1165, 2009. 06. 21

79. Kangil Kim, Guenyoung Kim, Yong Cheol Hong and Sang Sik Yang, "Non-thermal Microplasma-jet Device for Bio-medical Application", 35th Internation Conference on Micro and Nano Engineering 2009(MNE 2009), Ghent, Belgium, September 28-October 1. 2009

80. Guenyoung Kim, Kangil Kim, Kisun Chio, and Sang Sik Yang, “Fabrication of a micro hole-array for hollow cathode discharge”, 2009 International Microprocesses and Nanotechnology Conference, pp.428-429 Sapporo, Japan, 2009. 11. 16-19

81. Minwoo Nam, Haekwan Oh, Geunyoung Kim, Keekeun Lee and Sangsik Yang, "Fabrication of a microlens array based on quartz wet etching and its application in photolithography", 2009 International Microprocesses and Nanotechnology Conference, pp.424-425, Sapporo, Japan, 2009. 11. 16-19

82. Haekwan Oh, Keekeun Lee, Sangsik Yang, "The development od SAW gyroscope based on progressive wave", 2009 International Microprocesses and Nanotechnology Conference, pp.744-745, Sapporo, Japan, 2009. 11. 16-19

83. K. Lee, S. Yang, H. Oh, "Optimal design of SAW-based gyroscope to improve the sensitivity", MOEMS-MEMS SPIE Photonics west, 7592-24, Sanfrancisco, USA, 2010. 01. 26-28

84. M. Nam, H. Oh, G. Kim, S. Yang, K. Lee, "Development of a microlens array (MLA) for maskless photolithography application", MOEMS-MEMS SPIE Photonics west, 7592-24, Sanfrancisco, USA, 2010. 01. 26-28

85. K. Han, D. H. Jun, N. T. Hong, S. Lee, S. Yang, "The influence of the arrangement and spacing of CNT array on the characteristic of field emission", MOEMS-MEMS SPIE Photonics west, 7592-24, Sanfrancisco, USA, 2010. 01. 26-28

86. Haekwan Oh, Hyungkeun Lee, Kisun Choi, Sang Sik Yang, Keekeun Lee, "Improving the sensitivity of SAW gyroscope using the progressive wave", The 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology(APCOT), pp. 86, Perth, Australia, 2010. 6-9 July

86. Kangil Kim, Jae Duk Choi, Yong Cheol Hong, Guenyoung Kim, Kisun Choi, Jong-Soo Lee, and Sang Sik Yang, "Atmospheric cold plasma-jet for cancer therapy", The 5th Asia-Pacific Conference on Transducers and Micro-Nano Technology(APCOT), pp. 102, Perth, Australia, 2010. 6-9 July

87. Kangil Kim, Geunyoung Kim, Sang Sik Yang, “Atmospheric Pressure Micro Plasma-jet for PDMS Surface Modification”, 36th Internation Conference on Micro and Nano Engineering (MNE 2010), Genoa, Italy, 2010. 9. 21.

88. Kangil Kim, Jae Duk Choi, Guenyoung Kim, Jong-Soo Lee, and Sang Sik Yang, “Atmospheric Plasma Jet from a Micro Nozzle Array and Its Biological Effects on Living Cells for Cancer Therapy”, The 9th Annual IEEE Conference on Sensors (Sensors 2010), pp. 1910-1913, Hawaii, USA, 2010. 11. 3.

89. Haekwan Oh, Hyungkeun Lee, Sang Sik Yang, and Keekeun Lee, “Development of wireless passive surface acoustic wave(SAW) gyroscope with standing wave mode”, 23rd International Microprocesses and Nanotechnology Conference (MNC 2010), 12D-11-126, Fukuoka, Japan, 2010. 11. 12.

90. Geunyoung Kim, Kangil Kim, and Sang Sik Yang, "A micromachined atmospheric pressure plasma-jet device", 23rd International Microprocesses and Nanotechnology Conference (MNC 2010), 11D-8-142L, Fukuoka, Japan, 2010. 11. 10.

91.Haekwan Oh, Sang Sik Yang, and Keekeun Lee, "DEVELOPMENT OF PASSIVE SURFACE ACOUSTIC WAVE GYROSCOPE WITH STANDING WAVE MODE," IEEE 24th International Conference on Micro Electro Mechanical Systems (MEMS 2011), Cancun, Mexico, Jan. 2001.

92.Kangil Kim, Hak Jun Ahn, Geunyoung Kim, Jong-Soo Lee, and Sang Sik Yang, "THE ROS EFFECT OF ATMOSPHERIC-PRESSURE PLASMA JET ON CANCER CELL," Proceedings of 2011 International Conference on Microtechnologies in Medicine and Biology (MMB2011), pp. 118-119, Lucerne, Switzerland, May 4-6. 2011.

93. S.Y. Song, Y.D. Han, K.I. Kim, S.S.Yang and H.C. Yoon, "A fluoro-micro beads counting platform for proteins immunoassay at minute concentrations in real human samples", ISMM2011, Seoul, Korea, F3-046, 2011. 6. 2.

94. Kangil Kim, Hank Jun Ahn, Geunyoung Kim, Jong-Soo Lee, Sang Sik Yang, “Effect of Atmospheric-Pressure Plasma-jet on Living Cancer Cell and Its Underlying Molecular Mechanisms”, The 3rd International Conference on Microelectronics and Plasma Technology(ICMAP 2011), B-20P, Dalian, China, 2011. 7. 6. (Best poster award)

95. Geunyoung Kim, Kangil Kim, Yeongtaek Oh, Tae-Gyu Park, Dong Chul Han, Sang Sik Yang, “Atmospheric-Pressure Plasma Jet from an Array of Micro Holes for PDMS Surface Modification”, The 3rd International Conference on Microelectronics and Plasma Technology (ICMAP 2011), B-21P, Dalian, China, 2011. 7. 6.

96. Haekwan Oh, Keekeun Lee, Kyungtae Eun, Sung-Hoon Choa, Sang Sik Yang, “Improving the insertion loss and sensitivity over existing SAW strain sensor”, Eurosensors , Athens, 2011. 9. 5.

97. Hakwan Oh, Yeolho Lee, Soosuk Lee, Sang Sik Yang, Keekeun Lee, “Development of Novel Love biosensor for simultaneous detection of multi-analyte”, Eurosensors , Athens, 2011. 9. 6.

98. Haekwan Oh, Kijung Lee, Sang Sik Yang, Keekeun Lee, “The development of novel multi axis detection gyroscope using surface acoustic wave”, International conference on Micro and Nano Engineering, Berlin, 2011. 9. 21.

99. Kangil Kim, Geunyoung Kim, Yeongtaek Oh, Tae-Gyu Park, Dong Chul Han, and Sang Sik Yang, “Atmospheric non-thermal pressure plasma-jet system for PDMS bonding precess”, 24th International Microprocesses and Nanotechnology Conference, 26P-7-131, Kyoto, Japan, 2011. 10. 26.

100. Haekwan Oh, Kijung Lee, Hyungkeun Lee, Keekeun Lee, Sang Sik Yang, “The interference effect of Rayleigh wave and intersecting Shear-Horizontal wave”, 24th International Microprocesses and Nanotechnology Conference, 27P-11-127, Kyoto, 2011.10. 27.

101. Haekwan Oh, Kijung Lee, Hyungkeun Lee, Keekeun Lee, Sang Sik Yang, “Analysis of Interference Effect between Rayleigh wave and Shear Horizontal wave for developing SAW gyroscope”, 2011 International Conference on Computer Science and Logistics Engineering (Special Session: ICSIOT), H10068, p. 150, Zhengzhou, 2011. 12. 8-10.

102. Minwoo Nam, Sang Sik Yang, Keekeun Lee, “Planar Refractive Microlens Arrays with High Fill-Factor Fabricated by Polymer Replication Technique”, SPIE Photonics West 2012, The Moscone Center, SanFrancisco, CA, USA, 2012 . 1. 21~26

103. Kangil Kim, Hank Jun Ahn, Minuk Jo, Jong-Soo Lee, Sang Sik Yang, “The Effect of Air and Nitrogen Plasma Jets on Living Cancer Cell and Its Underlying Molecular Mechanisms”, 4th International Conference on Plasma Medicine(ICPM4), P108, Orleans, France, 2012. 6. 17-21.

104. Kangil Kim, Jisoo Hong, Minuk Jo, Eunpyo Moon, Sang Sik Yang, “Inactivation of Plant Pathogenic Fungi by Non-Thermal Atmospheric Pressure Plasma Jet”, 4th International Conference on Plasma Medicine(ICPM4), P168, Orleans, France, 2012. 6. 17-21.

105. Kangil Kim, Hank Jun Ahn, Minuk Jo, Jong-Soo Lee, Sang Sik Yang, “Generation of ROS by Air Plasma-jet on Living Cancer Cell and Its Underlying Molecular Mechanisms”, International Conference on Microelectronics and Plasma Technology 2012 (ICMAP2012), P111, Jeju, Korea, 2012. 7. 4-6.

106. TaeGyu Park, Jong Heon Jeon, Geunyoung Kim, Dong-Chul Han, Kangil Kim, Sang Sik Yang, “The characteristics evaluation of the atmospheric pressure plasma for bio application”, International Conference on Microelectronics and Plasma Technology 2012 (ICMAP2012), S005, Jeju, Korea, 2012. 7. 4-6.

107. Chen Fu, Sangsik Yang, Keekeun Lee, “An optimized design Love wave biosensor on 41° XY LiNbO3/PMMA structure”, APCOT 2012, ac12000228, Nangjing, China, 2012. 7. 8-11.

-={Quick move !!}=-
[International Journal (SCI)]|[International Conference]|[Domestic Journal]|[Domestic Conference]